A long press of the Settings button will cause the device indicated by the Halo colour to be overwritten with the new device. A portable doorbell that grows with your family and adapts to your lifestyle, with an outstanding 200m wireless range supported by Honeywell Home ActivLink™ technology for total peace of mind. Honeywell Series 9 Wireless Portable Doorbell. To perform a factory reset, remove one battery (or turn off the power to a plug-in doorbell). Press and hold the settings button whilst replacing the battery (or turning on the power). To do this, remove one battery (or turn off the power to a plug-in doorbell). The Halo Light and LED Strobe features are discreet but effective visual alerts which complement your chosen melody in loud environments, or help to alert you when the doorbell can’t be heard. I have a wired doorbell. How do I replace the batteries on the doorbell? No. When the Halo Light on your doorbell flashes, press the Sun button on the doorbell one or more times to select a different halo colour. The doorbell will play an alert sound, and your motion sensor is now linked. The Honeywell Home trademark is used under license from Honeywell International Inc. DC917NGA - Wireless portable doorbell with range extender, customisable melodies and push button – Grey, DC515NP2A - Wireless plug-in doorbell with sleep mode, nightlight and push button – White, DC515NGP2A - Wireless plug-in doorbell with sleep mode, nightlight and push button – Grey, DC515NGA - Wireless portable doorbell with halo light and push button – Grey, DC515NA - Wireless portable doorbell with halo light, sleep mode and push button – White, DC313NGA - Wireless portable doorbell with volume control and push button – Grey, DC313NA - Wireless portable doorbell with volume control and push button – White, Maximum volume of 90dB carries up to 100m, Choice of 8 melodies, with customisation option, Halo Light and LED Strobe provide visual alerts, Range extender option widens wireless range to 400m, Maximum volume of 80-84dB carries up to 60-80m. It is not advisable to mount the push button onto metal surfaces as the material can block wireless signals between the push button and the doorbell. This is not advisable as the push button is designed to work with the wall bracket for easy battery maintenance. No. I have a Friedland EVO+ Wirefree Doorbell system. For external motion sensor (L430x): configure the motion sensor for Walk Test according to the selected Day or Night operating mode as follows: For internal motion sensor (HS3PIR1x, HS3PIR2x): Open the battery compartment, or detach the motion sensor from its base to operate the tamper switch. Never miss a visitor again with a Honeywell Home DC915NG doorbell, thanks to a market-leading 5 year battery life, 100m audible range and 200m wireless range. Details. For external motion sensor (L430x): configure the motion sensor for Walk Test according to the selected Day or Night operating mode as follows: For internal motion sensor (HS3PIR1x, HS3PIR2x): Open the battery compartment, or detach the motion sensor from its base to operate the tamper switch. To perform a factory reset, remove one battery (or turn off the power to a plug-in doorbell). If the doorbell is not detected, remove and reinsert the USB connector, or try a different USB port. It is advisable to use good quality alkaline type batteries, because this type of battery has a more stable voltage, and lasts longer than the lower cost zinc-carbon type. Get it as soon as Wed, Jul 8.